2.distance at least 20 meters.enabled smart phone control,2.4 Ghz wireless tech. 3.16 million colors change,dimmable from 100% to 1%. 4.Night light mode avilable. 5.Saturation control——White and RGB CO-exist. 6.60s off delay.
CE FCC Rohs
Welcome to smart lighting led system
This sample bulb can work with rgbw remote control series and wifi controller or by IOS and Android system. Quick and easy installation of the smart bulb is the same as any other common led bulb.The bulb must be screwed into the light socket and switch on at the wall for 2.4G HZ wireless operation.Allowing the Wifi App to turn on and off ,dim and bright the lights for color change.Secure communication is done by syncing the remote and APP once.
Size:Φ49.5*58mm Radio frequency:2400-2483.5MHz Input voltage:AC100~240V Modulation mode:GFSK Color temperature:2700K~6500K Working Temp:-20°C~60°C Luminous Flux:300~350LM LED Quantity:3.0W RGB SMD5050 2pcs Housing: Aluminum Beam angle:30° 1.0W SMD 3030 8pcs
Each light can transmit the signal after the specific time and auto-transfer.
1.In the same zone.Each light only auto-transfers and response to the different signal received last time in the same zone. 2. Auto-transfer can happen among different groups, the lights receive the signal from the lights in the different zones, only transfer the signal, don’t response.
Saturation control——White and RGB CO-exist
Long press M button,go to Satuation mode, r/g/b/c/w co-exsit, you can choose any color,and change the brightness/color-temperature of white.
2.4G RF remote Controller with countless spotlights within 30m
Touch the color ring to choose any color you need based on 16 million colors. There is an indicator to inform you wheather it is in power. Touch the slider to choose any brightess you need. Press the master on button to choose all light to control and turn on all light ,long press it go to the white light for all light. Press the Zone off button to turn off the light in this zone to control and turn on all light ,long press it go to the night light for all light. Press the button like moon,light will be turn off delay 60S Press the M mutton go to the 9 mode.modes to choose. S- , slow down the speed of the light. S+,accelerate the speed of the light.
Bulb and wireless remote controller and APP installation
1. Battery installation Please take the remote controller and carefully press the battery cover and push it away in a downward motion. Install two AAA batteries into the remote controller. Exactly match the negative pole of the each battery into the largest spring. Do not touch the color ring when you install the batteries. 2.App installation Download and finish the installation of the IOS and Android APP as per wifi controller. 3.led bulb installation Talk the led bulb out of packing, hold it by the acrylic lens. Switch off the power at the wall or lamp switch before installation. Replace the original light bulb with the new wireless led bulb. Switch on the power, the led bulb will light under normal circumstances. Sync the remote or you APP to the bulb as per linking new lights to the remote controls and set to full brightness, change color or white. If the bulb does not sync, then firstly clear the first channel as per unlinking the lights.
• Program 1 (Fade in and fade out) Seven colors fade into each other. • Program 2 (Strobe white)warm white and cool white flashed up
• Programs 3 (Color flash)This program fades in and fades out the color red,green,blue ,warm white and cool white one after another.
• Programs 4 (RGBW fade in fade out)Touch the color right to choose any color you like • Programs 5 (Disco)Different colors strobe and flash to change randomly.
• Programs 6 (Red light SOS mode)In the program,red color brightens from 0%-100% and shuts down, the flashes three times.
• Programs 7 (Green light SOS mode)In the program,green color brightens from 0%-100% and shuts down, the flashes three times.
• Programs 8 (Blue light SOS mode)In the program,blue color brightens from 0%-100% and shuts down, the flashes
• Programs 9 (All in one)all the above 8 modes perform one afer another.
Paking and Delivery
We pass the CE FCC RoHs LVD EMC certification to endure the high quality and the satification of our customer.
To reduce the risk of electric shock,please insure the light socket is turn off at the wall light switch before replacing light bulbs. Even though the led light bulb is cold to touch shortly after normal operation,please be careful when handling the mental cooling fins as they may contain sharp edges.Always hold the bulb by acrylic lens. If the light fitting is damage,please seek professional assistance.
The advantage of the 5W RGB+CCT LED GU10 Spotlight
1.Combination function of basic illumination and ambiance lighting; 2.Wide options of over 640,000 colors,change according to your mood; 3.8 grades brightness adjusting, to achieve real energy-saving; 4.Use RF signal for telecontroller, free and easy operation,no direction in 20 meters;
5.Long life, lifespan up to 50000hours; 6.Low energy consumption, save 50% more than Low energy circular fluorescent Lamp; 7.No UV radiation, no stroboflash; 8.Accord with European Union CE, RoHS directive; 9.Synchronously controll any quantity of lamps by one remote.
GLEDOPTO CO.,LTD is a manufacturer specializing in the research, development and production of LED lights, which has two LED business groups.
One is Traditional LED Business Group (TLBG) located in Zhongshan since 2005.Our LED lighting products mainly include: LED tubes, LED spotlights, LED bulbs, LED strips indoor and outdoor, LED bars indoor and outdoor, LED modules indoor and outdoor, LED bulb, and so on. Our products have been exported to Europe, North America, Southeast Asia, Middle East, etc. Our products have CE certification and RoHs compliance for Europe market, and PSE for Japan market, C-tick for Australia market, etc
Q1. Can I have a sample order for led light? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light order? A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light? A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product? A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products? A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.